Help · Each page in Adintel
Building campaigns
A Performance Max campaign built from the products the account sold: checked by Google, created paused, switched on, changed and undone from the Build page.
What is the Build page?
Build, the last page of the side rail's Optimize group, builds a campaign inside Adintel from what the account has already sold. It builds one kind: a feed-only Performance Max campaign, which shows your products from the feed with no ads to write. A build starts from the account's sellers, the products with conversions in its last 90 days. Adintel chooses the products, the bidding, the places and the names for you, and you can change any of them; the language and the automation switches are set for you, and the budget is yours to type. Google checks the whole campaign before anything is made. The campaign is then created paused, in one request, and serves only once you switch it on with a second click. Create and switch on creates it the same way, then opens the switch-on's confirm if it reads back as sent. Undo removes it. Once it is in Google Ads, its settings, products and status are changed on the same page (how). How a build is made, beside the status line, says this in short; the rules behind each part are in how builds are made.
What are the New build and Builds tabs?
New build is the build you are working on, in six parts from top to bottom: What to build, Products, Budget and bidding, Where it runs, Names and Check and create. Its status line counts the sellers in the 90 days, market by market, such as US 151, UK 37 and Canada 28. Builds lists every build once it has been saved, apart from a draft you discard; the number beside it counts the drafts and the builds in Google Ads (below). The tab, the build and the market you have open stay in the page's address, so a reload or a link keeps them. The address also keeps what you typed in Find, the sellers' chip and the page of products you are on: choosing another market keeps Find and the chip but starts on the first page, and opening another build, a new one included, clears all three.
How do I save a draft?
A new build, or a saved one you change, shows a bar at the foot of the page: Not saved yet, with the parts not saved. Save draft keeps the build as a draft under Builds, and nothing goes to Google Ads. Discard in that bar drops the changes you have not saved, at once and with no question. Check with Google saves the draft too, before Google checks it.
How do I choose the market?
A market is a Merchant Center account and one of its feed labels (what a market is). Market, under What to build, lists each market with sales and how many sellers it has. The line under the list names the chosen market's feed label, the places it shows in and the campaign that serves it, or how many do. Choosing another market changes the products, places, language and suggested names to that market's; a name you typed yourself stays. The form stays on screen, dimmed, while that market is read. An account with no Merchant Center account linked has no products to build from, and the page says so: link one in Google Ads and Merchant Center, and its products show here after the next morning's read.
Which products does it show?
You choose them under Products, in one of these ways, and the build makes them into Google's product groups:
- The sellers, where a build starts: the market's sellers, each with its own tick box. A market with no sellers starts on Every product.
- By item: any of the market's products that spent in the 90 days, sold or not, found by title or item ID in Find. Each product you tick becomes its own product group, up to 998 products.
- By brand, By product type, By custom label or By category: the values the market's products carried in the 90 days. A product type or category is chosen at one Level, from the levels your feed has, and a value below the first level is named with the levels above it. Under Every other product, choose Left out to show only the values you tick, or Shown to show every product except those values. Either way, a value takes in all of its products, sold or not. Each of these four appears only when the market's products carry that attribute.
- Every product: the whole feed label.
Which ones start ticked, and why, is in how builds are made.
What do the sellers' rows show?
Each seller's row shows its conversions, conversion value, spend and ROAS, whether Google shows it now, and, under Now in, the campaigns that spent on it. A seller whose value did not cover the break-even of the campaigns it ran in is marked Below break-even. A product the rule did not tick says why on its row: Google's reason for not showing it, the campaign that excludes it by its item ID, or, under By item, that it spent with no sale. Find narrows the list to the sellers whose title or item ID contains what you type, and what you typed stays in Find if you switch to By item. The chips narrow the list further: All sellers, At or above break-even, Below break-even and Not shown by Google. Each chip's count covers only the sellers Find keeps. A product that spent without a sale is not a seller: find it under By item. The line above the rows totals the ticked sellers, including those Find or the chips hide: how many there are, their conversion value and spend, and their ROAS against your break-even.
How do I set the budget?
Type it: the amount under Budget is never filled in for you. Choose Daily, or A total for a test period with its first and last day: the period starts tomorrow at the earliest, in the account's time zone, and runs up to 90 days. A total budget takes no channel setting of its own and cannot become daily later. Under the amount, the page shows what the account spent a day over the 90 days and, where you chose sellers or groups to show, what the products chosen spent a day in their campaigns. Where no enabled campaign lost more than 5% of its impression share to its budget on average, it adds that your campaigns' targets, not their budgets, are setting their spend. The budget is always the campaign's own, never shared with another campaign.
How does it bid?
On your goal in Business context. With a ROAS goal it bids with Maximize conversion value and your goal as its target ROAS; with a cost per conversion goal, with Maximize conversions and your goal as its target CPA. Bid to your goal starts chosen, and No target lets Google spend the whole budget on as many conversions, or as much value, as it can find. With no target set there, the choice reads Bid to your campaigns' target or Bid to the account's own figure instead, with a line saying where the figure came from (the figure); with no figure either, it is No target or Your own target. Your break-even is never a target. The campaign bids on the conversions the account counts. Where you marked only some of those conversion actions as real outcomes, Bid on your real outcomes only, through a goal of their own for this campaign makes a goal of them for this campaign alone.
Where does it run?
Places starts with the places the campaigns serving this market target, reaching people in them or regularly there; when none serves it now, those of the campaigns that served it earlier. When there is more than one, you can remove any of them. Where one of those campaigns excludes a place inside them, such as a city, a line names it, with Leave them out here too. Language is the one the market's own campaigns target, else the one your Performance Max campaigns target most, and the line says which; with neither, it reads Every language. It has no control. Final URL is the asset group's final URL, offered from the URLs the account already uses, most used first. Channels follows the account's default; with a daily budget, Set for this budget gives the budget a setting of its own: Google's own networks always come first, Search Partners and the Display Network can each come first or second, and a network placed second can take a cap. Automations lists the campaign's automation switches, all of them off.
How is it named?
The name under Campaign follows the pattern your Performance Max campaigns already use, with what the build holds and the market in it: Sellers, a brand, Brands or All products, for example; where no pattern fits, Adintel uses one of its own. The name under Asset group starts as what the build holds, followed by the market. Both follow your choice of products until you type a name of your own, which is kept as you typed it. A suggested campaign name already in use gets the date added. Your client reads campaign names, so a name never says Adintel: one that does is held back until you remove the word.
What happens when I check with Google?
Check with Google saves the draft, then sends the whole campaign to Google to check without making it. If something is missing, such as the budget, the page scrolls to that part and says what to do. The confirm lists each part as it will be made, from the campaign and its budget to the products and the automation switches, and counts its operations, the separate changes Google counts. A part Google refuses is marked Google refused with Google's words, and one button takes you to the first part refused: Change the campaign for the campaign's own settings, and the bidding for a refused goal. Nothing can be created until Google accepts every part. If Google could not check it just now, the confirm says so and offers Check again. For a build by item, the confirm names any of its products Google does not show now: they stay in the campaign and show once Google shows them again. Changing the draft closes the confirm, and Create paused then needs a fresh check.
What does Create paused do?
Google asks every new campaign to declare whether it contains political advertising in the European Union: tick that this one does not, then choose Create paused. One request creates the budget, the campaign (paused), its places and language, its asset group with no assets, and its product groups, and Adintel logs them as one change. Adintel then reads the campaign back from Google and says whether it matches what was sent. The build's card reads In Google Ads, paused: nothing serves until you switch it on. Create and switch on, beside Create paused, also creates the campaign paused and reads it back. If it reads back as sent, the switch-on's confirm opens at once, and nothing more changes in Google Ads until you choose Switch on in that confirm. If not, the campaign stays paused and the build's card says why. If Google refuses the campaign when it is sent, nothing is made, and the build reads Google refused it with Google's words, ready to change and check again.
How do I switch it on?
Switch on, on the build's card or its row under Builds, opens a confirm that reads the account from Google first, not from Adintel's copy. It shows the campaign going from paused to enabled, with what it can spend a day, or a total budget it can start to spend, and how many of its products your other enabled campaigns also hold, whether Google shows them now or not. Under Your other campaigns, Leave them as they are, the default, changes nothing in those campaigns, and Google picks which campaign serves each product by Ad Rank. Exclude these products from them excludes the build's products from those campaigns. Only then, or when none of their product groups can be changed, does the confirm list them: each one it changes with Google's check, and any Left as it is with its reason (when). The confirm also says how many of the build's products Google does not show now. If Google refuses to switch the campaign on, the confirm says so, and nothing can be sent. When Create and switch on opens the confirm, its first line says the campaign was created paused and read back as sent. If the campaign is already enabled in Google Ads, the confirm says so.
Can a build's campaign be enabled or paused outside the Build page?
In Adintel, until a build is switched on from the Build page, only Switch on there switches its campaign on; once it is, only the Build page pauses it or switches it on again, with Pause and Switch on again under Status, or Undo the switch-on. Switching on excludes its products from your other campaigns only if you choose Exclude these products from them, and Pause it and put its products back in your other campaigns puts them back before pausing. Elsewhere in Adintel, such as the Overview or an anomaly, those changes are refused with Open the Build page. If the campaign was enabled in Google Ads directly, the build's card reads In Google Ads, on from Adintel's next read of the account (when) and says its products were not excluded from your other campaigns; Switch on on the Build page lets you exclude them. If a campaign switched on from the Build page is then paused in Google Ads directly, the card says so from Adintel's next read too, and that any product its switch-on excluded from your other campaigns shows in none of them: choose Switch on again under Status, or Undo the switch-on to put those products back.
How do I undo a build?
A build still paused has Undo on a strip under its card, and on its row under Builds. Its confirm lists what will be removed: the campaign, with its own budget, its asset group and its product groups. If anything was changed in Google Ads since it was built, such as the campaign enabled, renamed or given assets, its budget or target changed, or its product groups, places or language changed, the confirm lists it, and Undo goes ahead only once you tick Replace the change made since; if the campaign was enabled there, it may have spent. A change made from Adintel since it was built does not ask for the tick. Once Google removes it, the build shows Removed, and its draft stays under Builds, with Build it again. A build that is switched on has Undo the switch-on instead (below). Where there is no Undo, the card says No Undo here and why. Undo works while your plan is paused or after your trial ends.
How do I undo the switch-on?
Undo the switch-on puts back every product group it changed, then pauses the campaign; when nothing was excluded, it only pauses the campaign. Adintel stops before pausing if a product group does not go back, because Google refuses it, it was changed in Google Ads since and you did not tick Replace the change made since, or the send failed: the campaign stays enabled, and Adintel says how many did not go back. Choosing Undo the switch-on again then sends only what has not gone back. Once it is paused again, the build reads In Google Ads, paused, with its own Undo. If the campaign was already enabled in Google Ads when you switched it on from the Build page, Undo the switch-on puts back any product group it changed, without pausing the campaign. On the Overview or an anomaly, the campaign's recent changes show these without Undo: the switch-on with Undo it on the Build page; a pause from the Build page, or one made in Adintel to a build's campaign enabled in Google Ads directly, with Switch it on from the Build page; and a later switch-on with Pause it from the Build page.
How do I change a campaign I built?
Once a build is in Google Ads, paused or switched on, its campaign's settings are under its card whenever the build is open, in sections: Status, What it builds, Products, Budget and bidding, Where and when it runs, What it reaches for, What it keeps out and Pages and names. Open the build from its row under Builds with Change it, or Open it when you can only view it. Each row shows a setting as Adintel last read it, with a button to change it; the strip above the rows says when that was, and Adintel reads it again at once after each change made here. Every change goes through the same confirm as a campaign's controls: Adintel reads the campaign from Google first, so anything changed in Google Ads since shows in the confirm, and Google checks the change before you send it. Each change is logged, then shows on its row with Undo. The settings are there from the moment the build is created paused, so you can set them before you switch it on. Its market stays as built: a different market is a new build (what stays fixed).
Which settings can I change there?
- Budget and bidding: the budget, or a total budget's amount and last day; the bid strategy and its target; new customer bidding; and Conversions, every conversion the account counts or your real outcomes only, where you have marked real outcomes on Conversions and they are not everything the account counts.
- Where and when it runs: Places, any country, region or city found by name, with places left out and who counts as in them; Language; the Ad schedule, in the account's time zone; an End date; and Channels, with Search Partners on or off.
- What it reaches for: its search themes, up to Google's 50.
- What it keeps out: its negative keyword lists, the campaign's own negative keywords, removed here and added from the search terms page, and brand exclusions.
- Pages and names: the final URL, the automation switches, the tracking template and final URL suffix, and the campaign's and asset group's names.
Products and Status have their own ways of changing (products, pausing). Where its switch-on excluded its products from your other campaigns, an end date or a total budget's last day says that those products show in none of your campaigns once it ends.
How do I change its products?
Change products reads the campaign's product groups from Google and opens the build's editor, filled from what it holds now. In the campaign lists everything it holds, sold or not, so a product that stopped selling can be found and taken out. Tick and untick, or group them another way, then Review the change. The confirm says what is added and taken out, with Google's check. Where its switch-on excluded its products from your other campaigns, it asks about those campaigns too: for products added, Exclude these products from them, the default, as the switch-on did, or Leave them as they are; for products taken out, Put them back in your other campaigns, the default, or Leave them out of every campaign. Each choice lists the product groups it changes. If a product taken out cannot go back, the confirm says how many would show in no campaign, and the change waits until you leave them out of every campaign or undo the switch-on. Change the products in Google Ads sends it one campaign at a time (how). One Undo, on the Products row, puts it all back; a change that reached your other campaigns, only while the switch-on it was made under is in force.
How do I pause it?
Pause, under Status, pauses the campaign. Where its switch-on excluded its products from your other campaigns, the confirm asks first. Pause it and put its products back in your other campaigns, the default, does what Undo the switch-on does: the build reads In Google Ads, paused again, and you switch it on from its card, choosing again whether to exclude its products. Only pause it leaves those products showing in none of your campaigns until you switch it on again, and says so. A pause that puts nothing back leaves the build switched on: Status gives the day it was paused and offers Switch on again, which enables the campaign through the same confirm and leaves its products as they are. Status offers Switch on again for a campaign paused in Google Ads directly too. Pausing needs no active trial or plan; switching on again does.
What does the Builds tab show?
Every build once it has been saved: drafts, campaigns in Google Ads and those removed, with the chips All, Drafts, In Google Ads and Removed. A row has the campaign's name and type, the market, how many of the market's products it shows of those that spent in the 90 days, the budget, its state (Draft, Google refused it, In Google Ads, paused, In Google Ads, on or Removed) and the day it last changed. Open a row to see who made it and when, what it was built from, its bidding, budget and places as Adintel last read them, and its latest change from Adintel, unless a line above already says it. Its actions are Open the draft, Change it, Discard, Switch on, Undo, Undo the switch-on, Build it again and Open on the Timeline. Discard asks first; the draft is then kept on record as discarded and no longer listed, and nothing changes in Google Ads. Until you leave the row, it says Discarded with Undo, which brings the draft back.
Who can build?
An account's editors: they save drafts, check with Google, create, switch on, change, pause and undo. Checking, creating, switching on, switching on again and every change need an active trial or plan; pausing and undoing do not. A viewer reads the page and its builds, and Check and create says to ask the team's owner for editor access (team seats). In the demo, every part of the page works up to the click that would save or send something. An account set to observe-only, where the page says Adintel reads it and changes nothing in it, shows the products that sold, which Find narrows, and nothing can be saved, checked or created there; to build on it, ask us.
Still need a hand? Email support@adintel.io and a person replies.